Assembly - Brother BAS-342G Service Manual

6. ASSEMBLY

6. ASSEMBLY
Assemble each part in order of the numbers.
Apply grease to the required places when reassembling the parts and once every two years.
6-1. Thread trimmer mechanism (1)
Apply the grease <SA8837-001> specified by Brother in the places indicated by
When the ball joint assembly of the thread trimmer
rod H (6) has been disassembled, assemble it so
that the distance between the centers of the holes
is 527 ± 0.5 mm.
Tighten the set
screw on the
screw stop while
lightly pressing the
movable knife
lever shaft.
55
Tighten the two set screws (16) on the
screw stop while lightly pressing the thread
trimmer lever shaft.
1267B
BAS-342G
.
1. Movable knife lever
2. Movable knife lever D
3. Plain washer
4. Spring washer
5. Bolt
6. Thread trimmer rod H
7. Shoulder screw
8. Nut
9. Movable knife lever shaft
10. Set screws [2 pcs]
11. Thread trimmer lever shaft
12. Retaining ring C
13. Spacers [2 pcs]
14. Thread trimmer lever H
15. Thread trimmer lever V
16. Set screws [2 pcs]
17. Shoulder screw B
1268B
18. Nut
19. Extension spring
20. Spring hook