Thread Wiper Mechanism - Brother BAS-342G Service Manual

6. ASSEMBLY

6-14. Thread wiper mechanism

Align the thread wiper shaft bracket
and the bottom of the arm and then
tighten the two bolts with washer.
1. Thread wiper unit
2. Bolts with washers [2 pcs]
3. Bolt (Remove)
4. Plain washer (Remove)
5. Removed plain washer
6. Removed bolt
7. STOP switch harness
8. Thread wiper solenoid harness
Adjust the thread wiper after installing. (Refer to "7-11. Adjusting the thread wiper".)
83
BAS-342G
5153Q