Reading Sewing Data From Cf Cards - Brother BAS-342G Service Manual

3-5. Reading sewing data from CF cards

1
2
3
4
End data read/write mode
TEST indicator switches off
Press the R/W key.
• [-SEd] will change to [ ALL].
Press the or
read.
* If [ ALL] is selected, all sewing data (Nos. 100 - 999) will be read at
once.
[When memory switch No. 755 is ON]
The program number (0 − 99) is also displayed and can be selected.
If you select [ ALL] at this time, all sewing data (Nos. 0 - 999) will be
read at once.
Press the R/W key.
• The buzzer will sound and the selected sewing data will be loaded
from the CF card and copied into the sewing machine's internal
memory.
• The program numbers that have been read will be displayed in the
menu display.
* If there is a large volume of data in the CF card, it will take some time
for all of it to be read. To halt the reading of data, press the STOP
switch. If you then press the RESET key, the display will change back
to [ ALL].
Loading
Press the TEST key.
Turn off the power switch, remove the CF card, and then close the cover
of the CF slot.
BAS-342G
Select the [r 1] data read/write mode.
key to select the program number (100 - 999) to be
3. READING / WRITING DATA
4576Q
4577Q
4976Q
26