Brother BAS-342G Service Manual page 15

Work clamp settings
Setting
No.
value
Work clamp operating mode (*3)
1
2
3
4
5
6
7
050
8
9
10
11
12
*3 The operating modes given here are for the integrated-type work clamp. The same settings can also be made for
separate-type work clamps, but some parts and air tubes will need to be changed.
*4 No devices are compatible with the BAS-342G.
[Standard single pedal] Do not use this setting. (*4)
[Single pedal with no automatic work clamp lifter] Do not use this setting. (*4)
[Standard double pedal]
Work clamp lifts automatically, and drops when the work clamp switch is depressed.
* Dropping in one step or two steps can be set by means of memory switch No.
002.
[Double pedal with no automatic work clamp lifter]
Work clamp lifts while work clamp switch is being depressed.
[Work clamp intermittent presser foot 2-step clamping]
When the work clamp switch is depressed to the 1st step, the work clamp is
lowered, and when it is depressed to the 2nd step, the intermittent presser foot is
lowered. (Lifting is carried out simultaneously.)
Do not use this setting.
[Forward/reverse pedal]
When the start switch is depressed, the work clamp is lowered and the sewing
machine starts in that order with forward control, and when the work clamp switch
is depressed, the sewing machine reverses and the work clamp is lifted.
* Dropping in one step or two steps can be set by means of memory switch No.
002.
[2-step work clamp using two presses]
When the work clamp switch is depressed, the work clamp drops to the
intermediate position (when two-step operation is set), then drops fully, and then
lifts in that order.
* Dropping in one step or two steps can be set by means of memory switch No.
002.
[Standard triple pedal]
The left pedal lowers the work clamp to the intermediate position and the right
pedal (center) lowers it all the way.
The start pedal (right) starts the sewing machine.
(If the right pedal (center) is depressed first, the work clamp will drop to the
intermediate position and it will then drop fully when the left pedal is depressed.
However, the speed of work clamp operation cannot be controlled, so do not use
this operation.)
[Triple pedal with independent home detection]
The right pedal (center) is used exclusively for detecting the home position.
The left pedal raises and lowers the work clamp, and the start pedal (right) starts
the sewing machine.
[Special triple pedal with independent home detection]
The right pedal (center) is used exclusively for detecting the home position.
The left pedal moves the work clamp back and forth to the intermediate position,
and when the start pedal (right) is depressed, the work clamp is lowered and the
sewing machine starts.
[Single pedal operation using work clamp switch]
When the work clamp switch is depressed to the 1st step, the work clamp is
lowered, and when it is depressed to the 2nd step, the sewing machine starts.
Setting item
BAS-342G
2. FUNCTION SETTINGS
Default
value
3
6