Why Can Videos Captured In Director Mode Only Be Stored In The Phone's Internal Storage - Huawei P8 Faq

4.197 Why can videos captured in Director Mode only be
stored in the phone's internal storage?
This is because the quality of microSD cards can vary, and there is a risk of data loss or
corruption when videos are stored on the microSD card. In addition, it takes longer to read
data from microSD cards. For these reasons, videos captured in Director Mode are saved to
your phone's internal storage to provide a better user experience. You can manually transfer
the videos to other locations should you wish.
4.198 Why are there two LEDs on the camera flash? Why
does only one LED light up?
1.
2.
4.199 Why can't I turn on the flash when using digital
zoom?
When you use a digital zoom greater than 2X, your phone will take multiple shots and process
them with an algorithm. This process prolongs the shooting time. As the flash can only
provide a short burst of light, it is disabled when the digital zoom is greater than 2X.
4.200 Why is the OIS not very effective?
Due to phone size limitations, the OIS on your phone is designed for use in everyday shooting
conditions. However, the OIS is unable to fully stabilize photos when the camera is subject to
large vibrations, for example when you are walking or on a bus.
Please hold the camera steady when taking photos.
4.201 Why are colors in photos taken by my phone so
vivid?
By adjusting the color saturation slightly, your phone makes your photos look even better.
Huawei has optimized the camera's color saturation settings based on research and field
studies. We compared the color performance of the P8 with the iPhone 6 in a number of
scenarios. The P8 came out on top, especially for outdoor shots or photos taken in shopping
malls or restaurants where the color temperature is low.
The dual-color temperature flash consists of two LEDs with different color temperatures.
After monitoring the ambient color temperature, the phone can adjust the brightness of
both the LEDs to produce a cool or warm light. This helps create optimal lighting for
your photos.
By default, in flashlight mode or when capturing video, only one LED lights up. Both
LEDs will only light up if the flash is enabled manually when taking photos.