Why Are The Photos Blurred - Huawei P8 Faq

Hide thumbs Also See for P8:
Table of Contents

Advertisement

3.
4.
5.

4.55 Why are the photos blurred?

1.
2.
4.56 What are the differences between Super night mode
of my phone and long exposure of other phones?
Long exposure of other phones is based on pure physical exposure technology, which has a
high requirement for hand holding conditions. Due to low tolerance limit, overexposure in
bright spots is likely to happen. Restricted by the sensor and ISP, the exposure time will not
be too long, generally 8 seconds, and 30 seconds in extremely rare cases.
Your phone's Super night mode adopts a more advanced algorithm. Photos are generated by
multiple frames. The shooting time is not restricted in theory and longer exposure is supported.
Dark scenes and even scenes that are not clear to human eyes can also be restored. The image
and noise reduction effects are better by the white balance technology after shooting.
4.57 What are the requirements toward the shooting
environment in Super night mode?
In Super night mode, the shooting requires long exposure time. If your phone shakes too
much during the shooting, the image will be blurred. Therefore, hold your phone steadily or
use a tripod to facilitate the shooting. You are advised to stabilize your phone and use a
headset wire to control the shooting. A tripod is recommended to stabilize your phone.
Your phone's Super night mode adopts a more advanced algorithm. Photos are generated by
multiple frames. The shooting time is not restricted in theory and longer exposure is supported,
dark scenes and even scenes that are not clear to human eyes can also be restored. The image
and noise reduction effects are better than those achieved by long exposure using the white
balance technology after shooting.
Check that your phone is not charging. Otherwise, the flash can't be used.
Check that your phone has sufficient battery.
Your phone automatically disables flash when the battery level is low.
Charge your phone if necessary.
The flash may not turn on if your phone is overheated or the flash is too frequently used.
Wait for a while and try again.
Check that scanning software is disabled. Otherwise, the flash can't be used.
If the problem persists, contact Huawei technical support or take your phone to an
authorized Huawei service center.
The camera lens may be dirty.
If the photos are red and blurred with flash turned on, your hand might be too close to
the flash when you took those photos.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gar-ul00Gra-l09

Table of Contents