How Can I Set Up A Connection Between My Phone And B2 - Huawei P8 Faq

1.61 How can I set up a connection between my phone and
B2?
1.
After the B2 is powered on, the Bluetooth icon in the left upper corner of the screen blinks,
indicating that the phone is available for paired connection.
Enable the Bluetooth function on the phone and select HUAWEI B2-XXX in the Bluetooth
list.
2.
1.62 How can I reconnect the wrist band and my phone
after the Bluetooth connection is interrupted?
The wrist band is connected to only one phone
The phone actively disconnects from the Bluetooth device (disabling the Bluetooth function
on the phone or manually disconnecting the connection).
Within 3 min, if the Bluetooth function is enabled on the phone, the phone and the wrist band
are automatically connected.
In 3 min, the Bluetooth function of the wrist band is disabled due to expiry, and you need to
press the side button on the wrist band to enable the Bluetooth function. Then, the phone and
the wrist band can be connected.
The Bluetooth connection is disconnected because the distance is too long:
If the distance between the wrist band and the phone is restored within the specified range
within 20 min, the wrist band and the phone are automatically connected.
For the paired connection for the first time:
For the paired connection for the second time:
− After the pairing between the phone and the B2 is released, you can perform the
following steps to re-pair them: press and hold the side button on the B2 for 3s; touch
the Bluetooth icon
Bluetooth on the phone and select HUAWEI B2-XXX in the Bluetooth list.
− The B2 can simultaneously connect to two phones. To connect the B2 to the second
phone, perform the following steps: press and hold the side button on the B2 for 3s;
touch the Bluetooth icon
the Bluetooth on the phone and select HUAWEI B2-XXX in the Bluetooth list of the
second phone. (Note: At this time, the B2 is disconnected from the first phone. You
can select HUAWEI B2-XXX in the Bluetooth list of the first phone. When digit "2"
is displayed in the lower right corner of the Bluetooth icon on the B2, the B2 is
successfully connected to two phones.)
− After the phone is connected to the Bluetooth device, open the Huawei Wear app and
enter the main interface under the guidance. Slide down on the main screen to
synchronize the data for the first time. After the synchronization is successful, the B2
time and information have been initialized. Then, you can use the B2 normally.
on the screen; when the icon starts blinking, enable the
on the screen; when the icon starts blinking, enable