York Fitness C415 Owner's Manual page 11

Step 2.
1. Assemble the two pedals (35-L, 35-R) onto cranks (48, 49) with a screw driver.
Screw the left pedal's spindle counter-clockwise and the right pedal's spindle clockwise.
Use a wrench (or screwdriver) to screw the two spindles completely
2. Assemble the seat (22) to the seat slider. The slider can be adjusted in different angles. Tighten
the two Nuts under the seat using a screwdriver. In addition, the slider can be adjusted in
horizontal level by loosening the knob.
3. Insert the seat post (16) into the main frame (23), and choose the desired position, then tighten the
knob (26). Be sure the knob is always tightened.
Remarks: When you have chosen a desired position, and tighten the seat post knob until you hear a
"click".
11 www.yorkfitness.com.au
.