Applying The Table Filter - Trane Tracer SC Operation Manual

The navigation tree
7
This component contains the logically ordered and grouped content of all the elements of your
HVAC system. It is a complex component that is built dynamically based on a number of variables
and dependencies related to the configuration of a facility, the content of the HVAC, and other
systems operating in the facility. For more information, see

Applying the Table Filter

Table filtering allows you to see only selected data by setting up rules and conditions.The option
to filter tables is available on the following pages:
•
•
•
•
•
To apply a table filter:
1. From one of the above mentioned pages, click the filter
2. From the Column drop-down list, select a column on which to base your filter.
3. From the Condition drop-down list, select a condition.
4. In the Value field, enter a value that the selected Column and Condition will filter.
5. Click Filter.The table displays results based on the applied filter.
6. Click the
7. Use the Match drop-down list to include all rules or any rules.
Example filter for Data Logs
Column = created by
Condition = is
Value = Area
Results:The above filter will only display data logs that were created by Area.
BAS-SVU025A-EN
Alarms and Events
Data Logs
Reports
Spaces
Area, VAS, Chiller Plant (AlarmsTab)
button to add a rule. Up to three rules can be added to a filter.
To remove the filter, click Clear filter located directly above the first entry in the table on the page
you are viewing.
Navigating the User Interface
"The NavigationTree, " p.
icon.The Filter dialog box appears.
15.
13