Custom Graphics - Trane Tracer SC Operation Manual

4. Click Export Backup, which opens the Export dialog box. Browse to a location on your PC to save
To restore a backup Tracer SC copy:
1. From the left navigation menu, click tools > Backup and Restore.
2. In the Restore section, select a backup copy to restore (either from theTracer SC or from your
3. Click Restore.The Confirm Restore dialog box appears informing you that you will be logged

Custom Graphics

You can use custom graphics in theTracer SC user interface to view and navigate through the
building automation system. Custom graphics can be used as your home page, as status pages,
and can be associated with the customized navigation tree (see
to theTree, " p.
Tracer Graphic Editor (TGE) is required to create, modify, and publish custom graphics.To obtain
TGE, contact your localTrane service provider.
Global Referencers
A global reference is a connection that is made between a data point in theTracer SC and one or
more systems that are configured to respond to the value of the data point. A global reference is
made up of one trigger and one or more targets. It allows you to read a piece of data from one place
and then send to one or more places. Global references can be made to a point in theTracer SC
or to external points of BACnet MS/TP equipment.The Global Referencers list page serves as a
starting point for additional options.
Programs
The Programs page displays all available programs forTracer SC.TheTracer™TU service tool is
required to importTGP2 programs. After theTracerTU service tool has been installed, you can
upload programs to run on theTracer SC.To obtain theTracerTU service tool, contact your local
Trane representative.
System Logs
System logs are the standard "hydra" log files (hydra.log, hydra.log.0, hydra.log.1, hydra.log.2,
hydra.log.3, hydra.log.4). On the System Logs page, you can view logs and export them.
To view a system log
1. From the left navigation menu, click tools > System Logs.
2. Select a system log from the drop-down list and then click view.
To export the system log
1. Select a system log from the drop-down list and then click export. A system dialog box appears.
2. Click the Open with radio button, which allows you to choose a file format and location in which
Tracer ES IP Address
This function only applies toTracer ES users who need to establish a direct link toTracer SC.
BAS-SVU025A-EN
the backup copy. Exporting a backup copy is highly recommended.
local PC).
off of theTracer SC. Click restore to continue. After the restore process is complete,Tracer SC
will restart.
17).
to save the log.
"Adding a Custom Graphics Node
Tools
39