Mounting The Camshaft, Timing Marks - KTM 400-660 LC4 1998-2005 Repair Manual

A
A
tensioned

Mounting the camshaft, timing marks

– Fit the camshaft gear into the timing chain so that mark
is aligned with the top surface of the cylinder head when the timing
chain strand tensioned.
– Tilt engine to one side and place circlip
1
– Slide grooved ball bearing flush onto the preassembled camshaft and
fit the camshaft into the camshaft gear so that the mark
B
C
are aligned.
C
B
C
6-12E
A
(a point)
1
on camshaft gear.
B
and mark