KTM 400-660 LC4 1998-2005 Repair Manual page 57

2
1
4
3
5
6
– Remove the 3 bolts
1
– Pull out the shift rails
3
of the shift rolls
– Pull the shift roller
– Take the shift forks
engine housing.
NOTE: Although the counter shaft shift forks are identical they should
be refitted in the same position as before if reused. Therefore mark
accordingly upon removal.
1
and detach the shift mechanism support
3
and swing the shift forks aside, taking care
6
on the driving pins of the shift forks.
4 out of the bearing seat.
5
together with the shift rolls
4-16E
2
.
6
out of the