Removing The Cylinder Head Top Section - KTM 400-660 LC4 1998-2005 Repair Manual

4-7E
2
3
4
5

Removing the cylinder head top section

– Unscrew plug
automatic tensioner.
1
– Undo the 4 hose clamps and remove both hoses (
– Remove all 6 bolts
valve covers together with the gaskets.
– Remove the hexagon nut
solenoid valve
NOTE: A retaining bracket is only used in engines with EPC.
6
– Remove all 11 bolts. Then remove the cylinder head top section.
W
HEN REMOVING CYLINDER HEAD TOP SECTION DO NOT CHOCK IT
DAMAGE THE HOUSING OF THE WATER PUMP
1
with gasket and remove pressure spring from
4
together with the seal rings and take off both
5
and take off the retaining bracket of the
6
.
!
CAUTION
.
2 3
and ).
!
. T
HIS WOULD