Removing The Clutch Release Lever And The Oil Hoses; Removing The Oil Filter; Removing The Epc Wiring Harness; Removing The Ignition (Kokusan 4K-2) - KTM 400-660 LC4 1998-2005 Repair Manual

4-3E
2
4

Removing the clutch release lever and the oil hoses

– Undo bolt
1
– Remove the two banjo bolts
remove both oil hoses.
2

Removing the oil filter

– Remove all three bolts
with the O-ring or gasket.
– Take the oil filter out of the engine housing.
3

Removing the EPC wiring harness

– Undo the 3 bolts
4

Removing the ignition (Kokusan 4K-2)

– Undo 4 bolts and remove the ignition cover with the stator incl.
gasket.
1
and remove the clutch release lever.
2
together with the seal rings and
3
and take off the oil filter cover together
4
and remove the EPC wiring harness.