KTM 400-660 LC4 1998-2005 Repair Manual page 39

1
3
4
7
8
– Connect the water hose
– Attach the clutch cable and the decompression cable.
Starting with the 2003 model:
– Connect the hose
2
– Mount the fan with the screws
– Connect the water hoses
– Connect the vent hose to the valve cover.
5
– Connect the vent hose
6
– Connect the positive cable
– Insert the rear end of the carburetor in the carburetor connection
boot and the front end in the intake flange.
– Mount and tighten the hose clamps.
– Position the exhaust manifold and hold in place with the 4 springs
– Mount the screw
9
1
.
2
to the SAS valve.
3
and connect.
4 5
and to the water pump.
6
.
7
to the starter.
9
.
3-6E
8
.