Mounting Brackets For Use On Ships - Siemens SCALANCE XR524-8C Operating Instructions Manual

Dimension drawings

9.4 Mounting brackets for use on ships

9.4 Mounting brackets for use on ships
Introduction
To install a SCALANCE XR-500 on a ship horizontally, you require special mounting
brackets.
Below you will find the design drawing for making the mounting brackets.
You will find the more information on the construction of the mounting brackets in the section
"Technical data (Page 75)".
Note
Different mounting brackets
For the SCALANCE XR524-8C, the mounting brackets for left and right are identical.
For SCALANCE XR528-6M and SCALANCE XR552-12M, you require different mounting
brackets. The mounting brackets on one side are identical but the mounting brackets for left
and right are different.
Note
ISO tolerance and punching burr
For dimensions without tolerance details, the general tolerances "medium" acc. to DIN ISO
2768 apply. No punching burrs are permitted.
86
Operating Instructions, 05/2014, A5E03275845-05
SCALANCE XR-500