Siemens SCALANCE XR524-8C Operating Instructions Manual page 26

Description of the device
3.4 C-PLUG / KEY-PLUG
Removing a C-PLUG/KEY-PLUG
Inserting a C-PLUG/KEY-PLUG
26
1. Turn off the power to the device.
2. Remove the cover.
3. Insert a screwdriver between the front edge of the C-
PLUG/KEY-PLUG (position A) and the slot and release
the C-PLUG/KEY-PLUG.
4. Remove the C-PLUG/KEY-PLUG and screw the cover
plate firmly in place again.
1. Turn off the power to the device.
2. Remove the cover.
3. The housing of the C-PLUG/KEY-PLUG has a
protruding ridge on the long side (position B). The slot
has a groove at this position. Insert the C-PLUG/KEY-
PLUG into the slot correctly aligned.
4. Secure the cover plate again with the screws.
Operating Instructions, 05/2014, A5E03275845-05
SCALANCE XR-500