Siemens SCALANCE XR524-8C Operating Instructions Manual page 94

Simatic net scalance xr-500 series industrial ethernet switches
Hide thumbs Also See for SCALANCE XR524-8C:
Table of Contents

Advertisement

Certification
9.4 Mounting brackets for use on ships
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
● Keep to the installation guidelines
● You can always find the latest documentation on the Internet
● Working on the device
Note
The test was performed with a device and a connected communications partner that also
meets the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with
these standards, adherence to the corresponding values cannot be guaranteed.
Safety of electrical equipment
In the version put into circulation by Siemens AG, the SIMATIC NET products described in
these Operating Instructions conform to the regulations of the following European directive:
● EN 60950-1
94
WARNING
The devices meet the requirements if you adhere to the installation and safety
instructions contained in this documentation and in the following documentation when
installing and operating the devices.
The current descriptions of the currently available products can always be found on the
Internet under the specified entry IDs/Internet pages:
– "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
– "Industrial Ethernet / PROFINET - Passive network components" System Manual
You will find information on the system manuals in the section "Introduction (Page 5)",
in "Further documentation".
– "EMC Installation Guidelines" configuration manual
60612658 (http://support.automation.siemens.com/WW/view/en/60612658)
To protect the device from electrostatic discharge, personnel must first discharge any
electrostatic charge from their body before touching the device.
Information technology equipment - Safety - Part 1: General requirements
Operating Instructions, 05/2014, A5E03275845-05
SCALANCE XR-500

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalance xr552-12mScalance xr528-6m

Table of Contents