Winmate W10IB3S-PCH2AC-PoE Quick Start Manual
  1. Manuals
  2. Brands
  3. Winmate Manuals
  4. Touch Panel
  5. W10IB3S-PCH2AC-PoE S-Series
  6. Quick start manual

Winmate W10IB3S-PCH2AC-PoE Quick Start Manual

10.1” s-series hmi
Hide thumbs Also See for W10IB3S-PCH2AC-PoE:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
For more information on this and
other Winmate products, please
visit our website at:
www.winmate.com
Document Part Number: 9154111I100A
Please read these instructions carefully before using this product, and save this manual for future use
10.1" S-Series HMI
W10IB3S-PCH2AC-PoE
Quick Start Guide
W10IB3S-PCH2-PoE
V1.2

Advertisement

Table of Contents
loading

Related Manuals for Winmate W10IB3S-PCH2AC-PoE

Summary of Contents for Winmate W10IB3S-PCH2AC-PoE

  • Page 1 W10IB3S-PCH2-PoE Quick Start Guide V1.2 For more information on this and other Winmate products, please visit our website at: www.winmate.com Document Part Number: 9154111I100A Please read these instructions carefully before using this product, and save this manual for future use...
  • Page 2 - 41 - 5.1 HMI Device Specifications - 41 - 5.2 HF RFID Reader - 43 - APPENDIX - 44 - Appendix A: Cleaning the Monitor - 44 - Appendix B: Winmate Software Development Kit - 45 - - 2 -...

  • Page 3: Fcc Statement

    FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference.  This device must accept any interference received  including interference that may cause undesired operation.
  • Page 4 Disclaimer Winmate Inc. reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for...

  • Page 5: Safety Information

    Safety Information WARNING! / AVERTISSEMENT! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.

  • Page 7: Introduction

    Congratulations on purchasing Winmate® 10.1” S-Series HMI. Interactive and smart automation systems of intelligent buildings are in a fast growing phase. Winmate multi-touch S-Series HMI is suitable for home automation and room management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing look for any interior.

  • Page 8: Package Content

    1.2 Package Content Carefully remove the box and unpack your device. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. Standard factory shipment list: Quick Start Guide Driver CD &...
  • Page 9 Package may include optional accessories based on your order: VESA Wall Mount VESA Desk Stand VESA Desk Stand Bracket PCVS-V1 LA-100 LA-106 99KK00A0000E 9B0000000128 9B0000000412 Glass Wall Mount Front Side Wall Mount Kit Right: PCGM-V2L PCFW-V1 Left: PCGM-V2L Right: 99KK00A0000C 99KN00A00010 Left: 99KN00A00011 - 9 -...

  • Page 10: Product Overview

    1 Watt Speaker (Phoenix Type) *Digital I/O is an optional connector and may not be present in your model. ** Power Device (PD): IEEE 802.3at (25 W) ***RGB LED Status Light Bar only available for the model number W10IB3S-PCH2AC-PoE. - 10 -...

  • Page 11: Getting Started

    2 GETTING STARTED 2.1 Turning On Your Device Follow the following steps to turn on your device: 1. Connect HMI device to a thermal block (3-pin). 2. Connect the other side of the thermal block to the AC adapter. 3. Connect the AC adapter to the power cord. 4.

  • Page 12: Operating The Hmi Device

    2.2 Operating the HMI Device Winmate® 10.1” S-Series HMI support several versions of Windows OS: Windows 10 IoT, Windows Embedded 8.1 Industry Pro, Windows Embedded 8 Standard, Windows 7 Pro for Embedded Systems, and Windows Embedded Standard 7– WS7P. IMPORTANT: The device is shipped with the OS System according to your order.
  • Page 13 2.2.1.2 Utilities Utilities category allows automatically changing orientation from landscape to portrait mode or rotating the desktop to a different degree as 0°, 90°, 180°, and 270°. 2.2.1.3 Brightness Tap Brightness button to show current brightness level. To reduce the brightness, drag by touch to the left.
  • Page 14 2.2.1.5 LED Light Bar (Easy-Testing) Notice that LED Light Bar is an optional feature for 10.1” S-Series HMI and may not be present in your device. Tap Light Bar to access the LED light bar control panel, and select Red / Green / Blue/ Orange color to be displayed on the LED Bar.

  • Page 15: Using Hf Rfid Reader

    2.3 Using HF RFID Reader Notice that HF RFID Reader is an optional feature for 10.1” S-Series HMI and may not be present in your device. HF RFID is commonly used for ticketing, payment, and data transfer applications. 2.3.1 HF RFID Reader Location The RFID Reader is located on the bottom right front side of the HMI device.
  • Page 16 2.3.2 Trigger Setting  Auto Scan The default setting for RFID trigger is Auto Scan. Under this setting, the RFID Reader will always be ready to scan tags. 1. When the RFID tag is detected from RFID antenna, the data will be read automatically.
  • Page 17 2.4.3 Settings  Sound The Sound check box defines whether a beep sound will come with the data scanning.  Output This setting defines the output type of the scanned data. Two options are available:  Keyboard Wedge Under this setting, the data scanned is sent like keyboard data. The scanned data can be output directly to the demo area below this window, or user can also open other utility, such as Office Word or Notepad files, for data input.
  • Page 18  SDK For users following SDK for software porting, the scanned data can also be output with the format needed. Demo Area 2.4.4 RFID Output Settings Select RFID Output Type The default setting for built-in HF RFID Reader is to Read UID. For some applications, user might need to read or write further block data;...
  • Page 19 2.4.2 Writing Mode Refer to the RFID Porting Guide SDK to configure Writing Mode parameters. - 19 -...

  • Page 20: Using Front Camera

    2.4 Using Front Camera Notice that 2MP Front Camera is an optional feature for 10.1” S- Series HMI and may not be present in your device. NOTE: You camera screen may differ from the pictures in thus user manual. 2.4.1 Opening the Camera Perform one of the following to open the camera: 1.
  • Page 21 Item Description Tap to record videos Video Tap to capture photos Photo Tap to select the destination folder to save captured photos and videos, enable preview, Settings and select picture resolution and quality Tap to close the camera Close Capture Shows the object to capture Screen - 21 -...
  • Page 22 2.4.2 Shooting Photos To make a photo: 1. Open the Camera. 2. Focus on the object. 3. Tap to capture the object. 4. By default, the photo preview is displayed briefly on the screen. The preview screen automatically closes after 3 seconds. Alternatively, do one of the following: - Tap to delete the photo and return to the camera screen...
  • Page 23 2.4.3 Recording Videos To record a video: 1. Open the Camera 2. Focus on the object 3. Tap to record the video. The video recording screen appears 4. Tap to stop recording and return to the camera screen. 5. To playback the video, browse for the video file and play using a media player application on your device.
  • Page 24 2.4.4 Camera Settings 1. Tap to open the setting page. 2. Modify necessary settings. Item Description Check one of the check boxes to show the preview screen right after capturing a photo. • Show Preview: Check this box and enter the preview duration on Close preview after.

  • Page 25: How To Enable Watchdog

    To enable Watchdog, you need to download Winmate Watchdog utility. Find more information on Watchdog in “Watchdog Guide” that you can download from Winmate Download Center or File Share. To enable watchdog in Watchdog AP follow the instructions below: 1. On the right bottom side of the desktop screen, click triangle button to show hidden icons.
  • Page 26 Example: Every 10 min watchdog will monitor the system, in case any error occurs the system will restart automatically when the countdown time reaches Every 9 min watchdog timer will be reset to 10 min. Settings Description The system automaticity restarts when this Watchdog countdown time reaches zero.

  • Page 27: Using Recovery Wizard To Restore Computer

    2.6 Using Recovery Wizard to Restore Computer Note: Before starting the recovery process, make sure to backup all user data. The data will be lost after the recovery process. To enable quick one-key recovery procedure: 1. Connect the computer to the power source. Make sure the computer stays plugged in to power source during the recovery process.

  • Page 28: Turning Off Your Device

    2.7 Turning off Your Device To shut down the device: 1. Tap Start >Shut down. 2. Wait for your HMI device to completely turn off before disconnecting the power cord (if necessary). - 28 -...

  • Page 29: Mounting

    3 Mounting S-series HMI devices come with different mounting options suitable for most of the industrial and commercial applications. S-series HMI devices come with different mounting options suitable for most of the industrial and commercial applications. 3.1 Panel Mounting Panel Mount mounting solutions is suitable for many applications where HMI should be embedded in the machine.

  • Page 30: Vesa Mounting

    3.2 VESA Mounting 3.2.1 VESA Desk Stand PCVS-V1 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Model Name: PCVS-V1 Part Number: 99KK00A0000E Mounting Instruction  Use provided Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device.
  • Page 31 3.2.2 VESA Desk Stand LA-100 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Model Name: LA-100 Part Number: 9B0000000128 Mounting Instruction  Use provided Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device.
  • Page 32 3.2.3 VESA Wall Mount Bracket LA-106 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Model Name: LA-106 Part Number: 9B0000000412 Mounting Instruction - 32 -...
  • Page 33 Accessories Dimensions - 33 -...

  • Page 34: Front Side Wall Mounting

    3.3 Front Side Wall Mounting You can purchase Front Side Wall Mount Bracket from Winmate as an optional accessory for 10.1” S-Series HMI. Model Name: PCFW-V1 Part Number: 99KK00A0000C Dimensions - 34 -...
  • Page 35 Mounting Instruction 1. Cut a hole in the wall according to the cutout dimensions. 2. Attach the bezel with clips to the device; fix the bezel with Philips M4x5 screws. 3. Connect the device to the power source with the power cord. 4.

  • Page 36: Glass Wall Mounting

    3.4 Glass Wall Mounting The HMI device can be installed in a glass wall either from right side or from the left. You can purchase Winmate Glass Wall Mount Kit as an optional accessory. Right Side Left Side Model Name:...

  • Page 37: Installation

    4 INSTALLATION 4.1 Wiring Requirements The following common safety precautions should be observed before installing any electronic device:  Strive to use separate, non-intersecting paths to route power and networking wires. If power wiring and device wiring paths must cross make sure the wires are perpendicular at the intersection point.

  • Page 38: Connecting To Other Devices

    4.2 Connecting to Other Devices This section explains how to connect external interfaces to the HMI device. 4.2.1 Power Connector DC power source input is a 3 pin terminal block connector. Minimum Voltage 11.4V Maximum Voltage 12.6V Maximum Current 4.2A Voltage 4.2.2 Serial Port Connector Use COM1 serial port connector to connect your HMI to external...
  • Page 39 4.2.3 RJ45 Connector The 10.1” S-Series HMI has two RJ45 connectors that support 10/100/1000 Mbps Ethernet interface for connecting to the internet. Notice that only one RJ45 connector supports PoE function. Pin № Pin № Signal Name Signal Name TX1+ TX1- TX2+ TX2-...
  • Page 40 4.2.5 Digital I/O Connector Notice that Digital I/O is an optional connector and may not be present in your model. Pin № Pin № Signal Name Signal Name - 40 -...

  • Page 41: Specifications

    5 SPECIFICATIONS 5.1 HMI Device Specifications Model Name W10IB3S-PCH2AC-POE / W10IB3S-PCH2-POE Size 10.1" TFT (Widescreen) Resolution 1280 x 800 Brightness 350 cd/m (typ.) Display Contrast Ratio 800:1 (typ.) Specifications Viewing Angle -85~85 (H); -85~85 (V) Max Colors 16.7M Projected Capacitive Multi-Touch...
  • Page 42 Speaker 1 x 1 Watt Speaker Digital /O Terminal Block 10-pin Digital I/O (Optional) HF RFID Reader HF RFID Reader 13.56MHz (Optional) Front Camera 2MP Front Camera (Optional) Peripheral RGB LED Light Bar (W10IB3S- LED Light Bar PCH2AC-PoE only) Power Input 12 DC V Power over Power Device (PD): IEEE 802.3at...

  • Page 43: Hf Rfid Reader

    5.2 HF RFID Reader The RFID Reader can read and write data according to different HF RFID standards. HF RFID Standard Purpose Standard for MIFARE technology, which used ISO-14443 A in smart cards and proximity cards ISO-15693 Standard for tracking items Standard for Near Field Communication (NFC), ISO-18092 a short range technology that is commonly used...

  • Page 44: Appendix

    APPENDIX Appendix A: Cleaning the Monitor Before cleaning:  Make sure the device is turned off.  Disconnect the power cable from any AC outlet. When cleaning:  Never spray or pour any liquid directly on the screen or case. ...

  • Page 45: Appendix B: Winmate Software Development Kit

    Appendix B: Winmate Software Development Kit Winmate® provides Software Development Kit (SDK). The table below lists SDK provided by Winmate for 10.1” S-Series HMI with Intel ® Celeron ® Bay Trail-M N2930 processor: Item File Type Description Digital I/O SDK...
  • Page 46 NOTES ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________...
  • Page 47 NOTES ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________...
  • Page 48 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: sales@winmate.com.tw Official website: www.winmate.com...

This manual is also suitable for:

W10ib3s-pch2-poeS-series

Table of Contents