Installation For Wall Mounting - LG LST-260 User Manual

LGE CDMA Fixed Wireless Terminal
LST-260

2.1.1 Installation for Wall Mounting

To mount terminal on the wall, please follow the procedure to install it correctly.
1. Determine suitable location to mount terminal with mounting template;
2. Mark the two openings and select round or pan-head type screw;
3. Drill out the holes with drill bit smaller in diameter than the screws
4. Secure two screws into the wall, leaving about 65mm gap between the screw heads.
5. Insert the DC power jack into an electrical outlet and attach the telephone line into the
Phone Jack (RJ-11) of the terminal.
6. Place the terminal over the two screws.
7. Slide the terminal downward until the screw head is locked at the top of the opening and
the terminal is secure;
8. Check that set is fixed on the screws.
Mounting Template
13
65mm
65mm