Installation - LG PX8700 Service Manual

PX8700

4. Installation

4.1 Installing a Battery Pack
1) The Battery pack is keyed so it can only fit one way. Align the groove in the battery pack with the rail on the
back of the phone until the battery pack rests flush with the back of the phone.
2) Slide the battery pack forward until you hear a "click", which locks the battery in place.
4.2 For Adapter Use
1) Plug the adapter into a wall outlet. The adapter can be operated from a 110V source. When AC power is
connected to the adapter.
2) Insert the adapter IO plug into the phone with the installed battery pack.
Red light indicates battery is being charged.. Green light indicates battry is fully charged.
4.3 For Mobile Mount
4.3.1 Installation Position
In order to reduce echo sound when using the Hands-Free Kit, make sure that the speaker and microphone are
not facing each other and keep microphone a generous distance from the speaker.
4.3.2 Cradle Installation
Choose an appropriate flat surface where the unit will not interface with driver's movement or passenger's
comfort. The driver/user should be able to access the phone with ease. Using the four self-tapping screws
provided, mount the supplied braket on the selected area. Then with the four machine screws provided, mount
the counterpart on the reverse side of the reverse side of the cradle. Secure the two brackets firmly together by
using the two bracket joint screws provide. The distance between the cradle and the interface box must not
exceed the length of the main cable.
4.3.3 Interface Box
Choose an appropriate flat surface ( somewhere under the dash on the passenger side is preferred ) and mount
the IB bracket with the four self-tapping screws provided. Clip the IB into the IB bracket.
4.3.4. Microphone Installation
Install the microphone either by cliiping I onto the sunvisor (driver's side) or by attaching it to door post
(driver's side), using a velcno adhesive tape (not included).
4.3.5 Cable Connections
LG Electronics Inc.
- 14 -