System Features - LG LST-260 User Manual

LGE CDMA Fixed Wireless Terminal
LST-260
4 . S y s t e m F
4 . S y s t e m
4.1 Hook flash
When the terminal receives a hook-flash from the connected telephone device, it will
automatically allow:
1. For producing dial tone again after a phone number has been dialed without connection.
2. The use of special cellular services which may be available in your cellular service area.
Note: Hook-flash is accomplished in a call through either pressing the dedicated hook-flash key
which is available on some phones or through a rapid single press of the hang-up
mechanism upon which the handset rests when the phone is hung up.
4.2 ROH (Receiver Off Hook)
If the telephone equipment remains "off-hook", meaning that the handset is left off of its cradle as
it would be when you hang up, with no dialing activity for about 60 seconds, a ROH tone emits
from the receiver for a period of 60 seconds. After ROH tone, Line Lock Out Tone emits from
receiver for a period of 60 seconds.
This feature may be different or not by country specification.

4.3 System Features

Many cellular system offer special services such as call waiting, call forwarding, etc. You can
purchase these services from your cellular service provider. There are certain dialing sequences
to be earned, which vary from service provider to service provider. The service provider will
provide the dialing instructions for your system.
Call Forwarding - An incoming call can be delivered to another telephone number programmed.
Please contact your cellular service provider to use this feature.
Call Waiting – You can receive another incoming call during a call.
In this case, you will hear beep tone and then you can connect the second call holding the first
call by entering a code required by cellular service provider.
Your cellular service provider may require hook-flash (a quick, simulated "hang up") to answer
the waiting call. Other providers may require entering the codes involving digits 1-9, *, and # to
answer a waiting call.
Three-way Conference Calls – For three-way conference calls, a hook-flash transmits the
SEND command.
Please contact your cellular service provider for more information on using this service.
☞ Example
① Dial the first number and wait until connected;
② When connected, give hook-flash and dial the second number and give one more hook-
flash to be connected;
③ When the second call is connected, give hook flash to complete a 3-way conference call.
e a t u r e s
F e a t u r e s
20