Restrict Call Mode Setting - LG LST-260 User Manual

LGE CDMA Fixed Wireless Terminal
LST-260
Note 1. How to setup G3 FAX mode more easily
1. Press "#" + "#" + "7" continuously to enter G3 FAX/DATA programming mode.
2. Press Enable ("1") or Disable ("2") code.
Enable means that Data call path is changed to G3 FAX.
Disable means that Data call path is changed to RS-232C. (Default mode)
Note 2. Sending or receiving some documents by G3 FAX is possible only in AC power mode. If
AC power is gone, you cannot use the G3 Fax machine connected to the LST-260
Note 3. The recommended usage for this G3 FAX Mode is like this;
1. Disable G3 FAX Mode for normal usage.
You can make a voice call using the telephone device connected to the
-
"TEL/FAX" ports of the LST-260.
You can FAX a document using the G3 FAX machine connected to the "TEL/FAX"
-
ports of the LST-260.
2. To receive or send a document by FAX, should be set G3 FAX Mode. After receiving
the FAX document, disable G3 FAX Mode for another voice call.
3. If you want to use the LST-260 terminal only for G3 FAX sending or receiving other
than the voice call, then keep the terminal in G3 FAX Mode enabled state
Note 4. If G3 FAX mode is enabled, You cannot set Data mode(USB) and then you should
disable G3 FAX mode.
If Data mode(USB) is enabled, You also cannot set G3 FAX mode and then you should
disable Data mode.

5.8 Restrict Call Mode Setting

While the Restrict Call function is enabled, the specified numbers cannot be called. These
specified numbers start with specific digits. The specific digits are set according to the following
procedure (Storing the Deny dial number).
Among these specified numbers you can permit some numbers by designating start digits by
following procedure (Storing the Permit dial number).
LST-260 has 10 Deny dial numbers (1~10), and max. 32 digits can be stored in each Deny dial
number.
LST-260 has 10 Permit dial number (1~10), and max. 32 digits can be stored in each Permit dial
number.
If you set Emergency call, the emergency number is not applied to this restrict call.
☞ Note : LOCK code will always be the last 4 digits of the phone number.
27