Appendix Installation - LG -RD2130 User Manual

Appendix Installation

Installing a Battery Pack
1) The Battery pack is keyed so it can only fit one way. Align the groove in the battery pack with the rail
on the back of the phone until the battery pack rests flush with the back of the phone.
2) Insert the bottom of battery into the openning on the back of the phone. Then, push the battery down
until the latch clicks..
For Desktop Charger Use
1) Plug the charger into a wall outlet. The charger can be operated from either a 110V or a 220V
source. When AC power is connected to the desktop charger, both the green and red LED's blink
once.
2) Insert the phone with the installed battery pack or a spare battery pack into the individual battery
pack slot. Red light indicates battery is being charged.. Green light indicates battry is fully charged.
For Mobile Mount
Installation Position
In order to reduce echo sound when using the Hands-Free Kit, make sure that the speaker and
microphone are not facing each other and keep microphone a generous distance from the speaker.
Cradle Installation
Choose an appropriate flat surface where the unit will not interface with driver's movement or
passenger's comfort. The driver/user should be able to access the phone with ease. Using the four
self-tapping screws provided, mount the supplied braket on the selected area. Then with the four
machine screws provided, mount the counterpart on the reverse side of the reverse side of the cradle.
Secure the two brackets firmly together by using the two bracket joint screws provide. The distance
between the cradle and the interface box must not exceed the length of the main cable.
Interface Box
Choose an appropriate flat surface ( somewhere under the dash on the passenger side is preferred )
and mount the IB bracket with the four self-tapping screws provided. Clip the IB into the IB bracket.
LGE
LG Electronics Inc.