Appendix 1. Installation - LG -RD6130 User Manual

Appendix 1. Installation

1 Installing a Battery Pack
1) The Battery pack is keyed so it can only fit one way. Align the groove in the battery pack with the
rail on the back of the phone until the battery pack rests flush with the back of the phone.
2) Insert the bottom of battery into the openning on the back of the phone. Then, push the battery
down until the latch clicks..
2 For Mobile Mount
2.1 Installation Position
In order to reduce echo sound when using the Hands-Free Kit, make sure that the speaker and
microphone are not facing each other and keep microphone a generous distance from the speaker.
2.2 Cradle Installation
Choose an appropriate flat surface where the unit will not interface with driver' s movement or
passenger' s comfort. The driver/user should be able to access the phone with ease. Using the
four self-tapping screws provided, mount the supplied braket on the selected area. Then with the
four machine screws provided, mount the counterpart on the reverse side of the reverse side of the
cradle. Secure the two brackets firmly together by using the two bracket joint screws provide. The
distance between the cradle and the interface box must not exceed the length of the main cable.
2.3 Interface Box
Choose an appropriate flat surface ( s omewhere under the dash on the passenger side is
preferred ) and mount the IB bracket with the four self-tapping screws provided. Clip the IB into the
IB bracket.
2.4. Microphone Installation
Install the microphone either by cliiping I onto the sunvisor (driver' s side) or by attaching it to door
post (driver' s side), using a velcno adhesive tape (not included).
2.5 Cable Connections
2.5.1 Power and Ignition Cables