Hot Line - LG LST-260 User Manual

LGE CDMA Fixed Wireless Terminal
LST-260

5.3 Hot Line

While the Hot line function is enabled, the programmed number will be automatically dialed
when you pick up the handset and wait for the programmed hot line time (2~10sec) without any
key press.
Programming the Hot Line number
1. Press "#" + "#" + "3" continuously to enter Hot Line programming mode.
2. Press "#" and Hot Line Enable code "1".
3. Press "#" and Hot Line phone number (Max. 32 digits).
4. Press "*" to save and enable this function.
Enable the Hot Line Feature
1. Press "#" + "#" + "3" continuously to enter Hot Line programming mode.
2. Press "#" and Hot Line Enable code "1".
3. Press "*" to save.
Disable the Hot Line Feature
1. Press "#" + "#" + "3" continuously to enter Hot Line programming mode.
2. Press "#" and Hot Line Disable code "2".
3. Press "*" to save.
Programming the Hot Line Time
1. Press "#" + "#" + "3" continuously to enter Hot Line programming mode.
2. Press "#" and Hot Line time code "3".
3. Press "#" and enter desired Hot Line time (2~10 seconds).
4. Press "*" to save.
Note :
If Hot Line is disabled and Hot Line number has been already programmed, you can make
enable Hot Line feature by pressing "#" + "#" + "3" + "#" + "1" + "*" without entering a Hot Line
Number again.
5.4 Alarm
If alarm feature is enabled, you will hear ring at the programmed alarm time every day for 1
minute.
Alarm does not ring on the state of hook off, conversation or no service.
Entering Alarm Time (12-hour Mode)
1. Press "#" + "#" + "4" continuously to enter alarm time programming mode.
2. Press "#" and alarm time code "1" for 12-hour mode.
3. Press "#" and alarm time (HHMM +am("1") / pm("2")).
4. In the forenoon, time range is 0000~1159.
5. In the afternoon, time range is 1200~1259 or 0100 ~1159.
6. Press "*" to save and enable Alarm Time.
24