Troubleshooting Guide - Bay Tek Games Big Bass Wheel Service Manual

USE A SYSTEMATIC METHOD OF TROUBLESHOOTING TO DETERMINE THE
EXACT PROBLEM, PROBABLE CAUSE, AND REMEDY. USE THE PROCESS OF
ELIMINATION TO FIND THE FAULTY COMPONENT. ALWAYS CHECK FOR THE
SIMPLE AND OBVIOUS CAUSES FIRST SUCH AS UNPLUGGED, LOOSE OR
BROKEN WIRES, BAD SENSORS, BENT, PINCHED, STUCK, OR JAMMED
PROBLEM
NO POWER TO THE
GAME.
NO LIGHTS ON AT ALL.
NO AUDIO
BAY TEK GAMES, INC.

TROUBLESHOOTING GUIDE

TROUBLESHOOTING STRATEGY
COMPONENTS.
PROBABLE CAUSE
A. GAME IS UNPLUGGED
B. CIRCUIT BREAKER TRIPPED
C. POWER STRIP FAULTY
D. FAULTY CABLE/POWER SUPPLY
A. VOLUME TOO LOW
B. LOOSE WIRE
C. FAULTY I/O BOARD
D. FAULTY MOTHER BOARD
BIG BASS WHEEL SERVICE MANUAL
REMEDY
A. CHECK THE WALL OUTLET
B. RESET THE POWER STRIP BREAKER
SWITCH OR BUILDING CIRCUIT BREAKER
C. CHANGE THE PLUG POSITION, REPLACE IF
NEEDED.
D. SEE "POWER SUPPLY DIAGNOSTIC"
SECTION, PAGE 62.
A. FOLLOW THE DIRECTIONS ON PAGE 21 TO
ADJUST THE VOLUME.
B. CHECK THE AUDIO CABLE (AACEAU010)
CONNECTIONS FROM THE
I/O BOARD TO THE MOTHER BOARD,
SEE BELOW.
C. REPLACE THE I/O BOARD (AACB1900).
D. REPLACE THE MOTHER BOARD (AAMB6).
Page 43