SAB xFinder 2 User Manual page 9

Note: If you encounter any problems setting up your product, please contact your local retailer
helpline.
7.1 Connecting the Antenna
Connect one or two satellite coaxial cable from the wall to LNB IN.
1.
Connect a cable/terrestrial coaxial cable to AERIAL IN.
2.
Note: Cable and terrestrial can't concurrence.
Connecting the TV
1. TV with the HDMI connector:
For the best picture quality, connect the product and TV using an HDMI cable.
·
Note:
1. Connecting your TV directly to the audio/video output of the product will assure a more vivid
picture and enhance your viewing enjoyment.
Connecting to the LAN:
Connect one end of the Ethernet cable to the product and the other end to the LAN router.
TV with Motorized System (DiSEqC 1.2)
Connect one end of your coaxial cable to the LNB IN connector on the Xfinder and the other end to
the REC or Xfinder connector on the DiSEqC 1.2 motor.
Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
All our Xfinders are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the Xfinder at the same time.
9