Angle(Satellite Guide) - SAB xFinder 2 User Manual

Press [Exit] key to exit the scanning.
6.

10. Angle(Satellite Guide)

When you enter to "Angle" menu, you will see
the screen like below:
"Angle" is use for user to enter local longitude;
local latitude and satellite longitude. By the
evaluation from the Xfinder evaluate the
antenna azimuth and antenna elevation; user
can follow this guidance to adjust antenna.
1 In "Satellite" item, press [VOL+/VOL-] key to
switch satellite that you want to set or press
[OK] key to enter satellite list for selection.
2.In "Satellite Longitude" Item, display
Longitude value of current Satellite. You can
edit it by number keys and [VOL+/VOL-] key.
3.In "Local" Item, press [VOL+/VOL-] key to
select Manual or city that satellite setting
Press[Red] key to add a new city
Press [Green] key to edit the select city.
When you press [Yellow] key, there will
show up a warning message for reminding
whether you will delete the current city or
not. If you select "Yes", the current city will
be deleted.
When you press [blue] key, there will show
up a warning message for reminding
whether will delete all cities or not. If you
select "OK", all cities will be deleted.
4. You can use number keys to input
parameters in "Longitude" and "Latitude" at add
city and edit city menu.
5. You can use [VOL+/VOL-]key to select
east or west in "Longitude" and "Satellite
Longitude", select north and south in
"Latitude".
6. Moving highlight to "calculate" item and
press [OK] key. The lower column on the
screen will calculate the corresponding value
automatically.
7. Orientation means the angle between south
and satellite.
19