A/V C Ontrol - SAB xFinder 2 User Manual

Language: press [Volume Up/ Volume
1
Down] key to select menu languages, the
selections of languages include: English,
French, German, Russian, Arabic,
Portuguese, Turkish, Spanish, Polish,
Italian etc.
First Audio: Some channels have more
2
than one audio language for choosing; by
this function you can set the first audio for
this channel. If the playing channel has the
same audio as the "First Audio" you set,
system will play this audio language as
default. If the channel hasn't the suited
audio language, then the system will
compare automatically with second audio
language. The selections of audio
languages include: English, French,
German, Russian, Arabic, Portuguese,
Turkish, Spanish, Polish and Italian.
Second Audio: If the channel has no
3
correspond audio with "First Audio" but
have corresponded audio with "Second
Audio", system will play the second audio
language as default. If no audio language
corresponds with the "Second Audio", then
the default language of current channel will
be played automatically. The selections of
audio languages include: English, French,
German, Russian, Arabic, Portuguese,
Turkish, Spanish, Polish and Italian.
Audio Priority: Press [VOL+/VOL-] key to
4
select Dolby or Language.
EPG: Press [VOL+/VOL-] key can select
5
EPG language.
Subtitle Language: Press [VOL+/VOL-] key
6
can select subtitle language.
Teletext: You can set teletext language. If
7
the streams have this language you can
see the teletext in language you set.
Press [Exit] key to draw back from
8
"Language" menu.
15.6 A/V Control
When you enter to "TV System" menu, you will
see the screen like below:
Display Mode is for switching the system
outputting video resolution. Move highlight
on it and press left or right key, it will switch
video resolution circularly by the sequence
"Auto-> By Native TV-> 720P_50>
720P_60-> 1080i_50-> 1080i_60->
1080p_50->1080p_60
to press [V.Format] Key under Full Screen
and their last setting saving will be efficient
for each others. By Source means system
will set the video output resolution
according to the program it's playing,
different resolution programs switching
perhaps will makes TV screen flickering. By
Native TV means system will be according
to the HDMI TV's max supported resolution
to set its resolution, if system is not
connected to a HMDI TV, it will set
resolution to be default
35
". This effect is equal
"