SAB xFinder 2 User Manual page 10

If you have two or more fixed antennas or LNBs, then we recommend you use a DiSEqC 1.0
switch.
Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC
switch.
Do the same for any other LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch,
connect the other end to the LNB IN socket on the Xfinder.
To the digital Xfinder, you can connect either a single satellite antenna directly or LNB of
multi-feed equipment.
10