SAB xFinder 2 User Manual page 16

Press [red] button to display the scan menu,
5
and then setting parameter, at last select
Manual Scan or Blind Scan to scan channels
of the selected satellites or TP. If you select
Blind Scan, NIT Search needless edit.
Note: Manual Scan can only scan channels of the
TP that in the TP list, but Blind Scan can scan
channels needless TP, it can search the has signal
TP.
Scan Mode: Press [VOL+/VOL-] button to
switch it between All and Free (means you
want to scan all channels or only scan free
channels).
Program Type: Press [VOL+/VOL-] button to
switch it among TV + Radio, TV Channel,
Radio (means you want to scan all channels,
all radio or only scan TV/Radio channels).
NIT Search: Press [VOL+/VOL-] button to
switch it between On and Off. If selected On,
meaning receive the latest transponder
information.
Press [yellow] button to switch to antenna
6
parameter list of highlight satellite.
LNB Type: Press [ok] button and then press
[VOL+/VOL-] button to select one item
among Universal, standard, user, unicable.
For Example: If you use the unicable LNB,
then you should select "Unicable" option in
"LNB Type" and will display the submenu for
Unicable setting.
TP Index: Press [VOL+/VOL-] button, or
press [ok] button and then press [CH+/CH-]
button to switch TP.
22K: Press [VOL+/VOL-] button, or press [ok]
button and then press [CH+/CH-] button to
select on or off. When this item is switched to
"ON", Xfinder will receive TV and radio input
signal from 22K port. If the item is switched to
"Off", the Xfinder will receive all signals from
0K port.
Note: When LNB Type is universal, 22K can't edit.
DiSEqC1.0: Press [VOL+/VOL-] button to
select one item among Disable, 1/2, 2/2, 1/4,
2/4, 3/4, 4/4.
DiSEqC1.1: Press [VOL+/VOL-] button to
select one item among Disable, 1/8, 2/8, 3/8,
4/8, 5/8, 6/8, 7/8, 8/8, 1/16, 2/16, 3/16, 4/16,
5/16, 6/16, 7/16, 8/16, 9/16, 10/16, 11/16,
12/16, 13/16, 14/16, 15/16, 16/16.
LNB Power: Press [VOL+/VOL-] button, or
press [ok] button and then press [CH+/CH-]
button to switch it among 13V/18V,
13.5V/18.5V, off.
Press [blue] button to enter into edit menu.
7
When in the satellite list it enter edit satellite
menu, or it enter edit TP menu.
Press [white] button enter into SI Info menu.
8
It shows the information of current TP. Like
frequency, provider name, network name,
network ID, Stream ID, Network TP Count,
TV list, radio list, level, quality, RF Level,
FEC, C/N, BER, MER. Press [red] button to
display the Network TP List.
Edit Satellite
16