E Thernet S Etting - SAB xFinder 2 User Manual

Aspect Mode is for switching the screen
aspect ratio mode. Now we provide below
options: 4:3 PS / 4:3 LB / 16:9/Auto. You
can press [Left/Right] key to select each
mode circularly. 16:9 will provide user pillar
box mode it means user use 16:9 TV to
display but need to see a 4:3 full display
picture. System will force press wide
screen picture to be narrow and there're
black band on left and right site. Auto
means system won't do any aspect ration
translation, 16:9 picture source will be good
display on a 16:9 TV but will be too narrow
on a 4:3 TV, and 4:3 picture source will be
too wide in a 16:9 TV but will be good
display in a 4:3 TV.
Video Output: Press [VOL+/VOL-] to select
RGB or CVBS.
Digital Audio Out is for setting the both
SPDIF and HDMI's digital audio output
mode, it has options LPCM Out, Auto, You
can press [VOL+/VOL-] Key to select each
mode circularity. LPCM Out means system
will decode no matter AC3 or PCM audio
track data to be LPCM, digital audio
decoder or HDMI TV will get LPCM digital
audio data. Auto means system will detect
which the connected HDMI TV can decode
and then output that data. If HDMI TV can
decode AC3, system just output RAW data,
if HDMI TV can decode LPCM only, system
will just decode AC3 or LPCM to be LPCM
and then output.
Press [exit] key to draw back from "A/V
Control" menu.
15.7 Ethernet Setting
1 .Select your Network Type as Wired or Wireless, if you
select Wireless, can configuring Wi-Fi (wireless) as the
following step:
Select Wireless on Default Network Type
item.
Press [red] button the wireless LAN network
list will appear, Select you Wi-Fi network and
press [ok] button, at last input password.
Press [OK] button on Connect item to start
connecting.
2. In this menu you may assign a dynamic IP
address to the digital Xfinder. To do so, select
the DHCP On.
3. If you have a static IP address, unselect the
DHCP Enable, then the IP Address, Subnet
Mask, Gateway and DNS options become
enabled. You have to set these options
according to your IP address.
15.8 Time Setting
When you enter to "Local Time Setting" menu,
you will see the screen like below:
GMT Usage: This item is use for open the
usage of GMT. You can press [Volume Up /
Volume Down] keys to switch "On/Off".
36