Save Default Value - SAB xFinder 2 User Manual

whether confirm to delete all channel. If you
select "OK", all the channel will be deleted.

15.3.3 Save default value

When you press [OK] key in the "Save default
value" item,there will show a message to inquiry
you"Do you want to set current database as
default data?".If you select "OK" option,it will to
set current data as default data
15.4 Software Upgrade
15.4.1 Upgrade by RS232:
We offer the functions for user to connecting
1
Xfinder (Master) to the other Xfinder (Slave)
via serial interface.
Connect master Xfinder to slave Xfinder via
serial interface. Enter "Software Upgrade"
menu in master Xfinder and press[Volume
Up/Volume Down]keys to switch upgrade
mode： All SW+bootloader /All
SW+Channel list/Software(no channel
list)/Channel list.
Moving highlight to "Start" on master reeciver
2
and press[OK]key to start upgrade.
Turn on slave Xfinder and it needn't operate
3
any setting.
Press [ ]key to draw back.
4 MENU
15.4.2 Upgrade By USB
In this menu you can upgrade the software from
USB conveniently, Press "Left/Right" button
select USB A or USB B; press ' OK ' button to
enter.
In this menu you can select the Upgrade Mode
among Software(No channel list), Channel list,
All SW+bootloader and All SW+Channel list,
and you can select the appropriate upgrade file
on "Upgrade File" item. After you select the
"Upgrade Mode" and "Upgrade File", press ' OK
' button on "Start" item, the Xfinder can upgrade
automaticlly.
NOTE:
You must put the upgrade file on the /ROOT
DIRECTORY of the USB storage.
15.4.3 Backup to USB
In this menu ,you can dump the software to the
USB equipment
1.In "Backup file",you can press [OK] key to
edit the file name.; Press "Left/Right" button
select USB A or USB B;
2.In "Backup to USB", you can press [OK] to
start backup software .
33