B Attery I Nformation - SAB xFinder 2 User Manual

Press [MENU] key to back to "Information"
2
menu.
15.2 Battery Information
When you enter to "Battery Information" menu,
you will see a screen like below:
1.Battery Capacity: Display percent of remaining
battery capacity , If Battery is change up, display
"change up".
2.Battery Display: You can press[VOL+/VOL-]
keys to switch On / Off. If selecte on, it will
display percent of remaining battery capacity in
full screen.
3.Low Capacity Warning: You can press
[VOL+/VOL-] keys to switch it between On and
Off. If select on, when battery capacity is less
than 10%, the screen will pop a reminding
message that "battery low capacity ".
4. Press [MENU] key to draw back from "Battery
Information" menu.
15.3 Default Setting
15.3.1 Default Value:
When you press [OK] key in the "Default
Setting" item:
There will pop a dialogue for you to enter
1
the password, and the default password is
"0000".
After you input the correct password,
2
there will show a warning message to
inquiry you "The operation will load default
and erase all the channels that user
added, continue?".
If you select "OK" option, the all revised
3
parameters of the Xfinder will reset to
default value. Please carefully to using
this function.
In step 1 and step 2, press[Exit]key can
4
draw back from this item and without
saving.
15.3.2 Delete All Channel:
When you press [OK] key in the "Delete All
Channel" item, it will pop a dialogue ask you
32