Timer - SAB xFinder 2 User Manual

The "GMT Offset" item is valid only when the
setting of "GMT Usage" is "Yes". You can
press [Volume Up / Volume Down] keys to
switch "GMT Offset" value, and the range is
"-12:00 ~ +12:00", increase each half hour
progressively.
You can press [Left/Right] to control
Summer time on or off.
"Date" and "Time" items are valid only when
the setting of "GMT Usage" is "No". You can
press [Volume Up / Volume Down] keys to
moving highlight and use number keys to
input directly.
If the current channel provides the correct
time information, you will see the current
time while you enter "Time" menu. If the
channel doesn't provide time information,
you have to input the date and time
information manually.
Press [exit] key to draw back from "Local
Time Setting" Menu.

15.9 Timer

Press [enter] key to open timer menu.
Current time information will display on the
first column; if the current time is incorrect,
please modify the time information in "Time"
item.
Timer Number: You can press [Volume Up /
Volume Down] keys to set Timer number,
and there are 8 timers in total.
Timer Mode: There are several modes for
Timer to setting, include Off, Once, Daily,
Weekly, Monthly and Yearly.
Timer Service: There are two options for
"Timer Service", include "TV Channel" and
"Radio Channel" (timer setting for channel
change and Wakeup/Sleep) and "Record
Radio" and "Record TV" (Timer setting for
Record the TV or Radio program to USB
Hard Disk) and Message (reminding
message).
When you select "Channel" (timer setting for
channel change and Wakeup/Sleep) option
in "Timer Service", the screen will display like
below:
i. Channel: press [OK] key to enter
channel list and select channel that
you want to setting.
ii. Date: use number keys to input your
wakeup date.
iii. On Time: use number keys to input your
wakeup time. Once the time's up, no
matter what the system is in standby
mode or in playing mode, the system will
automatically switch to the channel you
want and start to play.
iv. Duration: After you set a time for
"Duration" item, once the time's up, the
system will automatically switch to
standby mode. If you want not work this
function, set the duration is 00:00.
When you select "Message" (reminding
message) option in "Timer Service", the
screen will display like below:
v. Wakeup Message: press [Volume Up /
Volume Down] key to select reminding
message as Birthday, Anniversary and
General.
vi. Date, you can use number key to input your
wakeup date.
37