A Uto I Nstallation - SAB xFinder 2 User Manual

Note: If you selected more than one TP, it will
delete the highlight TP.
4. In "Delete All TP" item, press[ok] key and
select "yes" to press [ok] button to delete All
TP.
9.2 Auto Installation
"Auto Installation" is a very new and convenient function.
It will automatically detect all dishes connecting to this
machine and scan the available services belonging to
the satellite matched according to satellites and
transponders data in current database. You don't have
to input any parameter of your antenna settings. Just
press " OK " button to enter this "Auto Installation" menu
then it starts scanning and shows you the result at the
end of scanning.
9.3 Terrestrial Installation
Press [OK] key to enter the selected item.
1. You can select the Bandwidth according
different country.
2. You can set the Tuner Power ON/OFF.
3. Press [Red] key can directly into blind scan
mode to scan the current programs.
Press [Green] key to enter the following
4.
menu.
Scan Mode.
1 There are two modes. You can scan channel
by channel or by frequency".
2 When scan band is UHF and region is
"France",the range of Ch No. is from 21 to 69.
When scan band is VHF and region is
"France", the range of Ch No. is from 1 to 9.
(it's according to region)
3 Press [Red] key to enter blind scan menu, or
press [Green] key to enter TP scan menu.
4 Press [Exit] key to exit the scanning.
9.4 Cable Installation
Press [OK] key to enter the selected item.
1. You can input the Frequency by use the
numeric button of the RCU.
You can select the QAM value among
16QAM, 32QAM, 64QAM, 128QAM and
256QAM.
You can turn ON or OFF the NIT Search, if
you set the Scan Mode to Manual Scan.
2. Press [green] button to add a new TP.
Press [Yellow] button to delete the select
3.
TP
Press [blue] button to delete the all TP.
4.
Press [white] key to enter blind scan
5.
menu, or press [Red] key to enter TP scan
menu.
18