Http Upgrade - SAB xFinder 2 User Manual

15.4.4 Http Upgrade

1. When connected to the Internet, Xfinder can
manually or automatically make software update
from file from server.
Note:
This function depends on connection with
external server. In case of no software on
server, this function will not work.
15.4.5 FTP Upgrade
When connected to the Internet, Xfinder can
make software update from file from FTP server.
Note:
This function depends on connection with
external server. In case of no software on
server, this function will not work.
15.4.6 Upgrade By Satellite
This function can upgrade the software through signal
lines from the satellite
1 Select the satellite and TP or input the TP value and
download PID, these parameters you can get from
your provider.
2 Then move the highlight to the start button and
press [OK] button to start upgrade
15.4.7 Upgrade By Terrestrial
This function can upgrade the software through signal
lines from the Terrestrial
1 Select or input the Frequency, Bandwidth and
download PID, these parameters you can get from
your provider.
2 Then move the highlight to the start button and
press [OK] button to start upgrade.
15.4.8 Upgrade By Cable
This function can upgrade the software through
signal lines from the cable.
1 Input the frequency, symbol rate value and
download PID, and select upgrade mode.
2 Then move the highlight to the start button and
press [OK] key to begin to upgrade.
15.5 Language
When you enter to "Language" menu, you will
see the screen like below:
34