ABB ControlMaster CM10 User Manual page 48

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Input/Output / ...Analog Outputs / ...Analog Output 1 (2)
Auto Eng Range*
Eng Low*
Eng High*
Polarity**
*Not applicable if
Output Type
**Not applicable if
Output Type
46
1 1 1
/ , / and / DIN
8 4 2
If enabled (On) the Eng High and Eng Low values for the output are set to the engineering
range values of the source automatically.
The minimum engineering range output value.
The maximum engineering range output value.
Sets the polarity of the output signal.
If set to Negative, the output is energized when source is inactive.
If set to Positive, the output is energized when source is active.
is or is .
Digital Source None
is or is
Analog Source None
.
7 Advanced Level
IM/CM/B–EN Rev. H