ABB ControlMaster CM10 User Manual page 26

ControlMaster CM10, CM30 and CM50
Universal process controllers,
Autotune
Adjust
Setpoint Select
Alarm Acknowledge
View Select
Enter Advanced Level
24
1 1 1
/ , / and / DIN
8 4 2
Used to start or stop an Autotune routine. This menu is enabled only if Autotune mode is
On – see page 30.
Enables a value to be adjusted using the
The icon next to a value indicates the current adjustable selection.
Selects the local setpoint to be used (displayed only if more than 1 local setpoint is
configured).
Acknowledges any active but unacknowledged alarms.
Selects the Operator view to be displayed.
Displays the Access Level selection views – see section 5.4, page 27 for security options.
5 Operator Level Menus
/ keys.
IM/CM/B–EN Rev. H