ControlMaster CM10, CM30 and CM50
Universal process controllers,
... Input/Output / ...Analog Input 1(4)
Elect. Low
Elect. High
Linearizer
42
1
1
1
/
,
/
and
/
DIN
8
4
2
Sets the required electrical range.
Note. Applicable only to Millivolts, Milliamps, Volts and Ohms.
Linear Inputs
Millivolts
Milliamps
Volts
Resistance (low)
Resistance (high)
Sets the required electrical range.
Note. Applicable only to Millivolts, Milliamps, Volts and Freq. Input.
Selects the linearizer type required to condition the input signal.
Notes. For thermocouple applications using an external fixed cold junction, set Input Type to
Millivolts (see page 41) and select the appropriate linearizer type.
Not applicable for Pulse Input, Digital Volt Free, 24Volt Digital parameters – see page 41.
Standard Analog Input
0 to 150 mV
0 to 50 mA
0 to 25 V
0 to 550
0 to 10 k
7 Advanced Level
Accuracy (% of Reading)
0.1 % or ±20 µV
0.2 % or ±4 µV
0.2 % or ±1 mV
0.2 % or ±0.1
0.1 % or ±0.5
IM/CM/B–EN Rev. H