ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Display
Operator Functions
Autoscroll
Soft Key Function
Configuration
Auto / Manual
Local / Remote
Scroll View
Alarm Ack
Toggle Signal
Edge Signal
IM/CM/B–EN Rev. H
1
1
1
/
,
/
and
/
DIN
8
4
2
When enabled (On), operator pages are scrolled continuously at intervals of 10 seconds
per page.
Assigns a dedicated function to the Navigation key (right) – see page 6.
Displays the Access Level enabling selection of configuration levels.
Toggles between Auto and Manual control modes.
Toggles between Local and Remote setpoint modes.
Scrolls through each available Operator view.
Acknowledges all active unacknowledged alarms.
Provides source that toggles between 2 states – can be assigned to outputs or used to
select sources.
Provides an edge-triggered source that is active on key press. Can be assigned to outputs
or used to select sources
7 Advanced Level
39