ABB ControlMaster CM10 User Manual page 42

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Display /...Operator Enable Functions
Auto Manual Enable
Local Remote Enable
Alarm Ack. Enable
SP Adjust Enable
Settings
Brightness
Contrast
40
1 1 1
/ , / and / DIN
8 4 2
Turns on / off the ability for Auto / Manual control mode to be changed in Operator Level.
Turns on / off the ability for local / remote setpoint mode to be changed in Operator Level.
Turns on / off the ability to acknowledge alarms from the front panel.
Turns on / off setpoint adjustment in the Operator Level.
Adjusts display settings to suit ambient conditions.
Increases / Decreases the display brightness to suit local environmental conditions.
Increases / Decreases the display contrast to suit local environmental conditions (enabled
for CM30 and CM50 only).
7 Advanced Level
IM/CM/B–EN Rev. H