Kanomax 2211 Operation Manual page 47

Range of CO mass: 20-550ppm
Range of CO mass: 800-5500ppm
2
....................................Calibration is confirming
....................................The remaining time to a calibration end.
netzerotools.com
Use
Press
Use
tank, Press
..................Concentration value displayed on gas tank
......The valve before calibration
Use
･････････････････････････････Standby display
・ ・・・・・・・・・・・・・・・・・・・・・・・・Shows countdown default value in second.
・
Replace ZERO gas cylinder with SPAN gas tank:
Fully open the regulator valve to pass the gas flow,
press
netzerotools.com
to select [1.SPAN].
to display a cursor.
to enter a concentration value displayed on a gas
.
to select [YES]. Press
(CO Calibration:90sec/CO2 Calibration:120sec)
Operation
to start a calibration.
42