Installing The Amplifier Unit - Omron ZX2 Series User Manual

Installing the Amplifier Unit

Amplifier Units can be easily mounted to 35-mm DIN Track.
CONTENTS
Installation Method
INTRODUCTION
Hook the connector end of the Sensor Head on the DIN Track, and press in at the bottom
PREPARATION
FOR
until the Amplifier Unit locks into place. If necessary, fix it in place by the End Plate.
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Important
Thickness
Hook the connector end of the Sensor Head on the DIN Track first. The mounting strength may
decrease if the output cable end is hooked on the DIN Track first.
Positioning
Eccentricity
and Surface
Deflection
Removal Method
DETAILED
SETTINGS Push the Amplifier Unit up and pull out from the connector end of the Sensor Head.
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
24
Installation
Hook on the connector end
DIN Track (Option)
PFP-100N (shallow type/1 m)
PFP-50N (shallow type/0.5 m)
PFP-100N2 (shallow type/1 m)
End Plate (Option)
PFP-M
ZX2 User's Manual