Table of Contents
Advertisement
2017/11/10 22:17
5.7.4 User
User: Determine which impulse response (IR) file to use for the simulation.
The "U" label indicates that the impulse has been measured (with Torpedo BlendIR) by the user.
The "W" label indicates that the impulse has been converted from a wave (or aiff) file. You do not
have access to the microphone positioning options when using the User impulses (both
"U" and "W"). You have access to the "Overload" parameters only for the "U" impulse
responses.
5.8 MIKING
In the "MIKING" menu, you take the place of the sound engineer. This is where you will find the
"sweet spot", the perfect microphone position. You will also be able to control speaker saturation and
balance between simulated and non-simulated tones. The first two parameters determine the
microphone's position. You can move the microphone around inside a trapezoidal plane that the
Torpedo Remote software lets you visualize.
User's manuals - http://wiki.two-notes.com/
33/52
Torpedo Studio User's Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the Torpedo Studio and is the answer not in the manual?
Questions and answers