Safety Instructions; Mains Power - Two Notes Torpedo Studio User Manual

Last
update:
torpedo_studio:torpedo_studio_user_s_manual http://wiki.two-notes.com/doku.php?id=torpedo_studio:torpedo_studio_user_s_manual
2017/11/08
15:11
trademarks found in this document were used during the development of the Torpedo Studio product
but are in no way associated or affiliated with OROSYS SAS.
1 Foreword

1.1 Safety instructions

Before using the product, it is necessary to carefully read and to bear in mind the following
information. Keep this document in a safe place as it is important for the protection of both
user and product. Should you suspect any malfunction of the device, always seek the assistance of
a qualified technician.
1.1.1 Risk of electric shock
The triangle with a lightning bolt means that some parts of the product, even
when the power is turned off or unplugged, can retain voltage high enough to
cause serious electric shock. Any operation that requires opening the device
should be left to a qualified technician.
1.1.2 Reader warning
The triangle with an exclamation mark highlights important messages concerning
the correct use of the device.

1.1.3 Mains Power

Please verify that the voltage required by the device matches the voltage of your country. If it doesn't
or if you are unsure, do not plug the device to the wall outlet as this could result in damage to the
device and injuries to the user.
This product must not be used during lightning storms. In case of severe weather with a risk of
lightning, unplug the mains power supply to reduce the risk of electric shock and fire.
The mains power cable provided with the unit complies with the standards of the country where you
purchased the product. If replacement is needed, please use a standard compliant cable.
http://wiki.two-notes.com/ Printed on 2017/11/10 22:17