Two Notes Torpedo Studio User Manual page 28

Last
update:
torpedo_studio:torpedo_studio_user_s_manual http://wiki.two-notes.com/doku.php?id=torpedo_studio:torpedo_studio_user_s_manual
2017/11/08
15:11
to the external signal.
Output Freq.: Indicates the frequency of the Torpedo Studio digital outputs. Analog outputs
always run at 96 kHz.
5.4.3 Midi
Channel: Select here the MIDI Channel you want the Torpedo Studio to respond to. When "All"
is selected, the Torpedo Studio responds to all the channels (omni mode). All the signals
received at the MIDI input are sent back through the "MIDI OUT/THRU" output.
Control Change: Select whether or not the Torpedo Studio should respond to Control Change
messages.
Program Change: Select whether or not the Torpedo Studio should respond to Program
Change messages.
5.4.4 System
Brightness: Set the brightness level of the display screen.
Fan Control: Control the behavior of the cooling fan. Werecommend using the "Auto" mode, in
which the fan's speed is controlled by the internal temperature.
Firmware: Indicates the version of the firmware currently installed in the unit.
5.4.5 Device ID
http://wiki.two-notes.com/ Printed on 2017/11/10 22:17