Ignition Sense Cables - Motorola MTM800 FuG Installation Manual

68015000553-KC
Chapter 3: Vehicle Preparation
Figure 3: Accessory Plug
25
26
CAUTION: If the ignition line is not used, it MUST be grounded. Interference can cause
radio to hang.
NOTICE:
The terminal accepts a 12 V or 24 V input for the Ignition Sense line. For 24 V
installations, convert the main supply from 24 V to 12 V. For information, see
Guidelines for Radio Installation on page
range of DC/DC converters available from Alfatronix LTD UK. Some models are also
available through Motorola Solutions Service Organization, check with your Account
Manager.
The ignition sense cable kit contains a thin cable and a fuse holder.
3.4.1

Ignition Sense Cables

Table 42: Ignition Sense Cables
Number
PMKN4120_
6580283E02
40
Description
Ignition Sense Cable with fuse 4 A
Fuse 4 A for Ignition Sense Cable
1
35. Motorola Solutions recommends a suitable
Rating
Ignition Sense Cable, Length: 3 m
2
General
Send Feedback