FIG 10
The hose and telescopic tube can
neatly be hooked onto the back of the
vacuum for upright storage.
Clip the floor brush (Fig 11 – 2) onto
the hook provision on the back of the
vacuum Fig 11 – 1
Emptying the dust container
FIG 12
Press the release dust container release button
and pull cover open. Fig 13
To switch off, press the ON / OFF
switch Fig 10 – 2
Unplug from the power socket and
press the cord retract button until
fully retraced.
NOTE: The power cable can whip
around when being wound up;
therefore make sure you hold the
plug in one hand whilst retracting to
avoid any possible injury.
MAINTENANCE
.
Empty the dust container a frequently as
possible or when the suction power is
reduced. Do not allow the dust to fill over
the "MAX' line indicator. Fig 12 – 1
FIG 11
FIG 13